PE6 Spores

PE6 spores (Penis Envy 6 spores) sold for the purposes of microscopic study. Each syringe is prepared in front of a laminar flow hood under strict laboratory conditions. Spores legally produced in Jamaica.

What does your order contain:

BD™ Safety-Lok™ syringe containing PE6 spores suspended in either 3ml or 10ml of distilled and sterilised H2O
18g x 1.5inch BD™ microlance needle
70% isopropyl alcohol swab

Legal Disclaimer

It is illegal to cultivate these spores in the UK. If you make it known that you intend to use this item for cultivation you will be banned from the website and subsequent purchases will be cancelled. You must be 18 years of age to purchase this item.

£4.99£9.99

Description

PE6 (Penis Envy #6) is a cross between Penis Envy (PE) and the Texas strain. The strain was developed by Shroomery veteran RogerRabbit in an attempt to create a modified PE which produced more spores.

This is how PE6 came to be in RogerRabbit's own words :

"A single sector fruiting isolate of PE, and another of TEX were placed on a petri dish with rattlesnake venom added to the agar. The snake venom helped the two dikaryotic strains share genetic information to form a third sector, which was labelled PE6. Other Isolates of the PE were labelled PE 1-7, and apparently, some of the 6, which was the cross, were in the same batch of prints. The idea was to get a good spore producing PE, but I never had time to stabilize the strain due to accidentally releasing it early. That's why sometimes they look like Texans and sometimes very much like PE."

Genus: Psilocybe
Species: Cubensis
Variety: PE6
Spores: Dark purplish brown with subellipsoid on 4-spored basidia
Habitat: Bovine, Equine Dung and Enriched Soils
Climate: Subtropical
Cap: 25-100 mm in diameter, convex to broadly convex to plane at maturity.
Stem: 120-200+ mm in length
Gills: Attachment adnate to adnexed. Grayish coloration in young fruit bodies becoming nearly black in maturity.

How do I store PE6 spores?

Spores should be stored in a cool, dark and dry environment. You can also store spores in the fridge (just make sure the syringe is in a clean zip-lock bag such as the packaging the spores are sent in).

Can I freeze my PE6 spore syringe?

DO NOT allow spores to freeze. This is not as you would rightly be guessing that it is a bummer to have to wait for your syringe to defrost before being able to view the spores under the microscope. The issue is that the spore cells will burst as the water expands on freezing.

How long can I keep my PE6 spore syringe before using?

Spore syringes should be ideally used as soon as possible. If stored correctly the spores will be fine for 6 months. The longer you leave the spore syringe the more chance of contamination being present when viewing under the microscope.

Can I reuse my PE6 spore syringe if I have some spore solution left?

Yes! The best thing to do is leave the needle on and flame sterilise before storing with the needle cover put back on. DO NOT remove the needle to put the syringe cap back on as this will allow an opportunity for contamination to occur. When you come to use your spore syringe again please flame sterilise again before pushing a small amount of the spore solution out of the needle. You are now able to carry on your microscopic studies.

How do I get my PE6 spore syringe ready for the microscope?

The aim of the game when viewing spores under the microscope is cleanliness. This means 1) you need to be as clean as possible, 2) your environment needs to be as clean as possible and 3) your equipment needs to be as clean as possible.

For you to be as clean as possible have a shower, wear clean clothes, and give your hands a good clean with 70% isopropyl aclohol (or where sterile gloves).

To work in a clean environment ideally you will be using a Still Air Box (you can see how to make one here) or a flow hood. If you do not have access to these then the next best thing is to work in a clean and draft free room. We are trying to eliminate as much as possible the chance of something landing on your slide other than your selected spores.

Give your equipment a good clean with 70% isopropyl alcohol as well. At this point we are ready to re-clean our hands with the alcohol wipe, remove the syringe cap and attach the supplied sterile needle ready for use.

How do I view my PE6 spores under the microscope?

Please see instructions below.

Can I purchase PE6 spores in print form?

Yes you can purchase this here.

Legal Information

It is currently illegal to cultivate Psilocybe Cubensis spores in the UK and many parts of the world. To learn more about the legality of Psilocybe Cubensis spore syringes please read Are Spore Syringes Legal?.

Instructions

We recommend viewing mushroom spores at a minimum of x400 magnification using a microscope. Learn more about the process of viewing spores under a microscope by reading this abbreviated excerpt, taken from the book “Fascinated by Fungi”, written by Pat O’Reilly. The book can be purchased from Amazon.

Reviews

Customer Reviews

Based on 8 reviews
100%
(8)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
David Alloi Perez
Flash!!

This came faster than a food delivery WOW

S
Stewart Bell
Speedy research spores

Fast delivery great presentation would recommend to friends

M
Master Chief
Brilliant Service and Product

The spores arrived the next day in clean and sanitised packaging. 10/10 highly recommend.

K
Kris de Vos
Quick delivery as per usual

👌

T
Terry Freeman
PE6

As is always the case, processed and dispatched quickly and efficiently - Very professional service, I am, and will continure to be, a repeat customer

0
    0
    Your Cart
    Your cart is emptyReturn to Shop